How to do window ac deep cleaning services ?

Great question 👍 Window AC deep cleaning is very important because dust and dirt buildup reduces cooling efficiency, increases power consumption, and can even cause health problems from mold and bacteria.

Here’s a step-by-step guide to properly deep clean a window AC unit:


🧰 Tools & Materials You’ll Need

  • Screwdriver set
  • Soft brush / old toothbrush
  • Spray bottle with coil cleaner or mild detergent + water
  • Fin comb (for bent fins)
  • Vacuum cleaner with brush attachment
  • Clean cloths & sponge
  • Water hose / spray jet (optional for outdoor condenser)
  • Gloves & mask (for dust protection)

đź§Ľ Step-by-Step Window AC Deep Cleaning

  1. Turn Off & Unplug the AC
    • Safety first — always disconnect power before cleaning.
  2. Remove the AC from the Window (if possible)
    • For deep cleaning, it’s best to take the whole unit out.
    • Place it on a flat surface with a waterproof sheet below.
  3. Detach the Front Grill & Filters
    • Unscrew or unclip the front panel.
    • Take out the air filters.
    • Wash filters with mild soap and water → let them dry completely.
  4. Clean the Evaporator Coil (Front Coil Inside)
    • Spray foam coil cleaner or detergent mix on the fins.
    • Leave it for 10–15 minutes.
    • Use a soft brush to remove dirt → be gentle with fins.
    • If heavily clogged, rinse with a low-pressure water jet.
  5. Clean the Condenser Coil (Back Coil Outside)
    • Spray with coil cleaner or detergent solution.
    • Rinse with water hose (avoid motor and wiring).
  6. Clean the Fan & Blower
    • Use a damp cloth or small brush to clean fan blades.
    • Vacuum out any dirt stuck inside.
  7. Check & Clean the Drain Tray
    • Remove and wash the drain pan (where condensed water collects).
    • Make sure the drain hole is unclogged, so water flows out.
  8. Clean the Outer Body
    • Wipe the casing with a damp cloth.
    • Remove any mold or dust around air vents.
  9. Reassemble the AC
    • Put filters, grill, and screws back in place.
    • Carefully install the AC back into the window.
  10. Test Run
  • Plug in and turn on.
  • Check airflow, cooling, and water drainage.

đź“… How Often?

  • Filter cleaning: Every 2–4 weeks.
  • Deep cleaning: Every 6 months (before summer & after summer).

👉 Pro Tip: If the AC has bad smell, mold growth, or heavy dirt in coils, it’s better to call a professional AC cleaning service since they use high-pressure jet cleaning and disinfectants.

Would you like me to also make you a short version (for your website or Facebook post) that explains “Window AC Deep Cleaning Service in Qatar” in a customer-friendly way?